ACI Logo aci@acicontrols.com

MY ACCOUNT
MY SHOPPING CART
LOG IN

  Enter Stock Code, Model No., or Keywords
PUSH BUTTON / PILOT DEVICES > 22mm Non-Metallic Devices > General Information
Previous Page | Next Page | View Printer-Friendly Page
J Series 22 mm Non Metallic
General Information

The ACI 22 mm Non-Metallic Pushbuttons are heavy duty industrial control devices available with a wide range of Illuminated and Non-Illuminated Operators. The buttons are fully gasketed for Type 4X (IP65) protection. This is to prevent the entrance of water, oil, and dirt past the operator into the enclosure. The modular construction makes "on the job" assembly both fast and simple. The contact blocks are "stackable" (up to a maximum of 4 contact blocks) allowing many combinations of control layouts. The ACI 22 mm Non-Metallic Pushbutton Operators are furnished standard with contact blocks as shown in the catalog. This feature simplifies selection and minimizes the needed stocking of this control device.

Order ACI 22 mm Non-Metallic Pushbuttons by the 6 digit Catalog Numbers as shown below:

Non-Illuminated Pushbuttons:

  1. Order the Non-Illuminated Operator. This will include 1 (one) contact block with the contacts as shown in the catalog.
  2. Order additional Contact Blocks (if needed)
 
Example: Order:
  • 22 mm Green Square Flush Non-Illuminated Button 1 NO +
  • 1 NC Contact Block (w/Mounting Adaptor) +
  • 1 NC Additional Block
 
  • Catalog Number: 104286
  • Catalog Number: 104493

Illuminated Pushbuttons:

  1. Order the Illuminated Operator complete with Lamp Holder, Mounting Adaptor, and Contact Block
  2. Order the Lamp for the Lamp Holder
  3. Order any needed additional Contact Blocks

Example: Order:
  • 22 mm Round Green Flush Illuminated Button Full
    Voltage Lamp Holder (w/Mounting Adaptor) 1 NO +
  • 120 Volt Lamp +
  • 1 NC Contact Block
 
  • Catalog Number: 104388 +
  • Catalog Number: 106296 +
  • Catalog Number: 104493

 

Technical Specifications
  UL File Number: E158650

Contact Rating: 10 Amp / 600 Volt (Pilot Duty) / A600 / R300
Mounting: 22 mm (7/8" Diameter) Hole
Maximum Number of Contact Blocks: 4 (8 Contacts)
Maximum Lamp Wattage: 2.5 Watts
Contact Operation: NO = Slow Make / Double Break
NC = Slow Break / Double Break / Positive Opening
Wire Range: Minimum: 22 AWG • Maximum: 12 AWG

 

Previous Page | Next Page

 

ACI Advance Controls Inc.
© 2017 Advance Controls, Inc. | 800.559.9ACI | 941.746.3221 | 4505 18th Street East, Bradenton FL 34203